|
|
한국어 원문 사용 전 준비 1. 전원코드를 본체와 전원 콘센트에 연결한다. 2. 초음파 프로브(probe)를 본체의 초음파 출력 컨넥터에 연결한다. 초음파 사용순서 1.시작→전원을 켠다→ 시간이 00으로 표시됩니다. 2.초음파 출력조정 다이얼을 한번 누르면 시간이 15분으로 표시되고 동작음이 울리며 시작됩니다. 3.초음파 헤드에 젤을 충분히 바르신 후 초음파의 적당한 출력을 설정하여 주십시오. (1) 출력 조정 다이얼을 오른쪽으로 돌리면 강한 출력이며,왼쪽으로 돌리면 약한 출력입니다. (2) 사용하시는 중간에 끄기를 원하시면 조정 다이얼을 한번 눌러 주시면 꺼집니다. (3) 초음파의 출력은 1~10단계이며, 5단계 이하로 사용하시길 권장합니다. 4. 종료→시간 설정은 15분이며 자동으로 꺼집니다. 영어 번역문 Preparation for pre-use 1. Connecting the power cord to the socket and body 2. Connecting ultrasonic probe to power connector for ultrasonic wave of body Use order of ultrasonic waves 1. Turn on the equipment. And, the time 0:00 is indicated on the screen. 2. Press the control dial. 15:00 will be indicated on the screen. Then, the equipment starts to operate with a timer sound. 3. Set up the power of frequency properly after putting a sufficient amount of gel on the ultrasonic probe head. (1) Twist the knob to right to increase power or to left to decrease power. (2) Press the control dial, if you want to turn it off during the operating time. (3) Ultrasonic power has 1 to 10 levels. We recommended you use Level 5 or lower. 4. End the operation. Set the operating time for 15 minutes. And it turns off automatically. |